Incorporating the same ladder- style frame of real 4WD vehicles, the MINI-Z 4x4 boasts a 3-link rigid axle suspension combining what would normally be two upper links into a single upper A-arm to deliver maximum suspension movement. A specially designed high-torque steering servo enables this machine to throw its elbows around in the hard terrain for excellent performance in the toughest rock-crawler conditions. The high-torque 130-size motor brings out the beast in the MINI-Z 4x4, specially geared to run well in the low to medium speed ranges common in crawling. Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the stunning visual appearance. The Kyosho Mini-Z 4x4 is the only mini crawler that delivers a full range of crawling performance in a smaller package.
The Mini-Z 4X4 uses a ladder frame design with steel vertical plates to deliver the ultimate balance of rigidity and flex for superior performance and durability. Solid front and rear axles feature steel tie rods and captured ends. Ring and pinion gear and other components feature metal construction for durability and consistent performance. Coil over shocks feature a 360 degree spring retainer that cannot be lost on the trail and keep the springs where they need to be while operating at the limits of the suspension.Tires and wheels are specific to each model on the Mini-Z 4X4. This model features scale reproductions of Nitto's "Ridge Grappler" tires mounted on custom wheels. The gearbox features molded covers, ball bearings, and 6 pinion gears that allow a full range of adjustment according to your chosen terrain. As with all Mini-Z models the gear mesh is easily set using the provided spacers. A standard slipper clutch protects the drive system and features a metal shaft and primary gear for durability. Ready Set Contents Complete chassis with built in electronics Factory painted body complete with fine details KT531P 2.4GHz transmitter Pinion gear set (10T, 12T, 14T, 16T, 18T, 20T) 3 pinion gear spacers. Required For Operation 4 AAA batteries for the transmitter 4 AAA batteries for the chassis.
Technical Data Length 197.3mm Width 87.3mm Height 89.1mm Chassis Type MX-01 Wheel Base 120mm Tread F/R: 72.7mm Weight 234g excl. Battery Motor/Engine 130 Class Gear Ratio 55.44:1/46.20:1/39.60:1/34.65:1/30.80:1/27.72:1 Front Tire Diameter 42.0mm Rear Tire Diameter 42.0mm Front Tire Width 14.3mm Rear Tire Width 14.3mm Battery 4 x AAA Alkaline Transmitter Syncro KT-531P Speed Approx. 5.4km/h Pinion gears 10T? The item "Kyosho 32521GM Mini-Z 4X4 Jeep Wrangler Unlimited Rubicon Granite Mt RTR Crawler" is in sale since Saturday, April 24, 2021.This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicles & Kits\Cars, Trucks & Motorcycles". The seller is "abbyrena8" and is located in Canton, Michigan. This item can be shipped to United States.